follow us on:
Login
Username:
Password:
Remember me


RE-PRINT products, originally distinguished for their quality. They are environmentally friendly, can be reused and do not infringe on the patents of the manufacturers. The final product is a result of development, know-how and long experience. It is the complete solution for your prints.


Toner Cartridges

The process of remanufacturing
7 steps to perfection

1. The process of the remanufacturing of a laser cartridge, start by checking the suitability of the empty cartridge model.
2. If the cartridge is suitable, disassembles into specific parts. Then, careful cleaning of the cartridge in a special station in order to remove the waste.
3. Replace worn parts (DRUM, PCR, Wiperblade, Chip, Doctor Blade etc.) and the corresponding amount of toner. It is important the quality of raw materials and an even greater the combination between them.
4. The final assembly is the next stage in which we use an internal label with the attributes of the cartridge.
5. For all the cartridges we are holding quality test print.
6. Throughout the whole process we check the proper mechanical operation of cartridge, the print density, and the coverage of the page according to the units of measurement of the OEM.
7. The packaging is done in an airtight bag which is resistant to moisture and light and the placement is made in ecological recyclable box.

The final result is a quality product, contain many reused parts, environmentaly friendly, cheaper but reliable in using. It is also lawful, does not infringe the patents of manufacturers and can be used again.

Inkjet Cartridges

The process of remanufacturing
7 steps to perfection

1. Regarding the inkjet cartridges, the process begins with the electronic control of the circuit (for all the cartridges that have electronic circuit) in a special machine, even forthe resistance on the Ohms.
2. We opted for the washing of the cartridge model internally, using hot deionized water, in order to achieve fewer than 10 microsiemens measuring for water, so they don't have salts, which destroy the Inkwell.
3. The replacement solution for the inner sponge rejected years ago because none of those tested had any quality in density of legalisation. Then we place the cartridges in special centrifuge machines and a special vacuum drying machine. So we achieve the ultimate in the sponge by having no moisture and by having density equivalent of legalisation.
4. The cartridge is now ready for the next stage. In the next stage we fill in special machines with the premium quality fluid ink of OCP.
5. The test printing is done only to the corresponding printers in order to control the quality in a whole A4 page rather than to a tape.
6. We pack the cartridge in special anti-static bags and then in special plastic clips that protect the electronic circuit and the nozzle plate.
7. The outer packaging, listing all the components of the cartridge model and the same packaging can be recycled.

The final product is completely friendly to the environment and attaches the colors extremely well as a genuine cartridge. It is also perfectly legal and does not violate the patents. An inkjet cartridge can be used again until 3-4 times. Then, we do recycle all the empties that cannot be remanufactured in cooperation with a recycling company. Do not throw away the useless cartridges into the trash.

The products RE-PRINT, is synonymous of quality and reliability. They are environmentally friendly and respectful of the manufacturers patents. It is worth to try, the profit is economical and environmental.

We care about delivering the best quality products.
Names and trademarks of the companies which are mentioned in this site are their registered trademarks. Their use is only for identifying purpose. The above mentioned companies do not manufacture, promote or approve of the sale of remanufactured products.
Printerland 2012 ©